NOTICE
Protruding screw heads!
Protruding screw heads can damage the L-505.01A200F.
►
Make sure that the screw heads are fully countersunk and cannot interfere with motion.
NOTICE
Damage due to mechanical stress on the cable!
The cable will break from excessive or repeated bending. A broken cable will lead to failure
of the L-505.01A200F or damage to the L-505.01A200F or the electronics.
►
Install the L-505.01A200F so that the cable has a bending radius of
≥
35 mm.
►
If necessary: Use cables that are approved for recurring mechanical loading (e.g., drag
chain cables).
Tools and Accessories
■
Mounting bracket, see
Optional Accessories (p. 11)
■
mounting hardware, in the scope of delivery of the L-505
■
4 screws ISO 4762, M3×6, A2
■
2 locating pins ISO 8734, 2m6×8
■
Mounting hardware, scope of delivery of the mounting bracket
■
4 screws ISO 4762, M3×10, A2
■
2 locating pins ISO 8734, 2m6×8
Building a Vertical Multi-Axis System
1. Attach the mounting bracket to the lower L-505.
a) Insert two locating pins 2 mm m6 × 8 mm into the motion platform of the lower L-505.
b) Align the mounting bracket to the lower L-505.
c) Insert the M3×10 screws into the holes in the mounting bracket and tighten them.
6 INSTALLATION
L505M0011EN
‒
10/22/2018
19
M O T I O N | P O S I T I O N I N G
