6
Installation
6.1
Mounting the L-505.01A200F
Overview
Tools and Accessories
■
Screw set for mounting the L-505.01A200F (p. 10)
■
Suitable screwdriver
Requirements
✓
You have read and understood the
general safety instructions (p. 8)
.
✓
You have provided a suitable surface with the holes necessary for the
screws and if
required, locating pins (p. 35)
.
■
The flatness of the surface is
≤
10 μm.
■
For applications with large temperature changes: The surface should have the same or
similar thermal expansion properties as the L-505.01A200F.
✓
You have accounted for the space required to route cables without bending and
according to regulations.
CAUTION
Risk of crushing by moving parts!
Risk of minor injuries from crushing between the moving parts of the L-505.01A200F or the
load and a fixed part or obstacle.
►
Use safeguards to protect limbs areas where they could be caught by moving parts.
►
Observe the safety distances in accordance with DIN EN ISO 13857 when installing
protective structures.
6 INSTALLATION
L505M0011EN
‒
10/22/2018
13
M O T I O N | P O S I T I O N I N G
