User Manual
L306T0002, applies to L-306.011100 / 011112 / 013112
MMa, 2019-AUG-20
PI miCos GmbH, Freiburger Strasse 30, 79427 Eschbach, Germany
Page 6 / 25
Phone +49 7634 5057-0, Fax +49 7634 5057-99, Email
Technical Features
All types of this product line are Z positioners with crossed roller bearings including an anti-
creep system.
Position Sensors
Models L-306.011112 and L-306.013112 include a linear incremental encoder. For
specifications, see the “Technical Data” section (p. 19).
Limit Switches
The product provides optical limit switches.
Each limit switch closes a contact on a dedicated line to the controller. If reached, the controller
stops the motion. If the controller does not stop the motion in time, the positioner runs into a
hard stop.
Reference Point Switch
The positioner is equipped with one direction-sensing reference point switch that is located at
about the midpoint of the travel range. This sensor provides a TTL signal indicating whether the
positioner is on the positive or negative side of the reference point switch.
The commands that use the reference signal are described in the user manual for the controller
and/or in the corresponding software manuals.
Unpacking / Scope of Delivery
1.
Before opening the packaging, check the packaging for signs of damage. If there is any
sign of damage, contact PI immediately (
2.
Compare the delivered items with the items listed in the contract and the list below.
If items included in the following table are missing, contact
Component
L-306-type precision Z positioner, model according to the order
Adapter/extension cable for the ordered controller (length: 3 m)
Mounting accessory, incl.
-
4 screws ISO 4762 M6x20
-
2 alignment pins ISO 8734 4m6x12
Short instructions for positioners with electric motors
Packaging material
3.
Remove the positioner from the packaging. Keep the packaging material for potential
subsequent transport, storage or return of the positioner.
