User Manual
L306T0002, applies to L-306.011100 / 011112 / 013112
MMa, 2019-AUG-20
PI miCos GmbH, Freiburger Strasse 30, 79427 Eschbach, Germany
Page 16 / 25
Phone +49 7634 5057-0, Fax +49 7634 5057-99, Email
Manually Moving the Platform
INFORMATION
It is necessary to repeat the reference move after moving manually and connecting to the
controller.
In some cases it may be helpful or necessary to move the platform by hand. E.g. this can be
necessary when the platform is stuck at the beginning or the end of the travel range (has
reached the hard stop).
Requirements
The positioner is
not
connected to the controller.
Tools and accessories
Hex key AF 1.5 mm or compliant tool
Procedure
1.
Insert the hex key in the corresponding hole of the platform shown below.
2.
If lifting of the platform is required: Turn the hex key clockwise until the inteded
platform position is reaced.
For moving down, turn the hex key counter-clockwise correspondingly.the nsert the hex
key in the corresponding hole of the platform shown below.
