User Manual
L306T0002, applies to L-306.011100 / 011112 / 013112
MMa, 2019-AUG-20
PI miCos GmbH, Freiburger Strasse 30, 79427 Eschbach, Germany
Page 15 / 25
Phone +49 7634 5057-0, Fax +49 7634 5057-99, Email
Maintenance
General Notes on Maintenance
NOTICE
Damage due to improper maintenance!
Improper maintenance can result in misalignment and failure of the L-306.
Only loosen screws according to the instructions in this manual.
Performing a Maintenance Run
Depending on the operating conditions and the period of use of the L-306, the following
maintenance measures are required:
Maintenance run
The maintenance run serves to distribute the existing lubricant.
After 500 operating hours or at least after 1 year, perform a maintenance run over the
entire travel range, in order for the existing lubricant to be distributed evenly.
If you operate your positioner continuously over only a short travel range (<20%of the
entire travel range), perform a run across the entire travel range approximately every
2000 motion cycles.
Lubrication
Under laboratory conditions, the positioner needs extra lubrication in exceptional cases only.
For continuous industrial use, the lubrication intervals must be defined individually.
Do not relubricate the L-306 without consulting our customer service department.
(p. 17).