User Guide
Doc# A824D001 v2.0
15-Nov-2018
Page 5 of 28
PI (Physik Instrumente) L.P.
16 Albert Street, Auburn, MA 01501
Tel: 508-832-3456 Fax: 508-832-0506
Email: [email protected]
1. About this Document
1.1. Objective and Target Audience of this User Guide
This User Guide contains information on the intended use of the A-824.21xxx series of motion controllers,
herei
nafter referred to as the “A-824”. It assumes that the reader has a fundamental understanding of basic
servo systems as well as motion control concepts and applicable safety procedures.
1.2. Symbols and Typographic Conventions
The following symbols and markings are used in this User Guide:
Symbol
Meaning
If not avoided, the situation could result in damage to the equipment.
Failure to observe these precautions could result in serious injury to
those performing the procedures and damage to the equipment.
1.
2.
Action consisting of several steps whose sequential order must be
observed
Action consisting of one or several steps whose sequential order is
irrelevant
1.3. Other Applicable Documents
Name
Instructions for SPiiPlus ADK Suite Installation
ACSPL Plus Programmer's Guide
SPiiPlus MMI Application Studio User Guide
SPiiPlus Command and Variable Reference Guide
SPiiPlus C Library Reference Programmer Guide
SPiiPlus COM Library Programmers Guide
SPiiPlus NET Programmers Guide
App Note - PEG and MARK Operations