(the less you use, the more performanceon the MPI-bus,
must be corresponding with the configuration in the
CPU’s)
•
PD/PC is the only master on
the bus
The TS-Adapter is the one and only master in the MPI-
bus
(adapter hast to speak to all passive clients)
•
Profile
Bustype of the connection
•
Local client address
Which local station-address is used for the TS-Adapter.
Please consider that a programming device has normally
the number 0,
operator panel have 1, CPU’s use 2, FM/CP’s 3 etc.
Please
: Never use the same station-number for 2
different stations!
•
Protocol type
Protocol type of the connection
•
Boot settings
Boot setting of the connection
7.4 Network settings
Here you can set the network configuration of the selected device:
• Factory default This button sets all over the network reachable devices to factory default.
• DHCP-client
active
When set the device acts as DHCP-client.
• IP address
Here you could enter the IP Address over which the device is accessed in the
network.
• Subnetmask
Here you could enter the Subnetmask of your network.
• Gateway address Here you could enter the IP address of your Gateway. Usual a router address.
• Device name
Here you could change the device name.
Factory default:
Handbook MPI-II
Page 52 of 92
