Manual I4XM01
MA 1279- A003 EN
14
5 Installation
phytron always delivers the
phy
MOTION
™ completely assembled in order to make sure
you can start with the installation and the wiring right away.
Further manual
Detailed information on this subject is in a supporting manual:
“
phy
MOTION
TM
Modular Multi-axis Controller for Stepper Motors”
5.1 Mechanical Installation
In case you receive an individually packed I4XM01 as an expansion module or after repair
or service unpack the module in ESD protected area only.
CAUTION – Possible damage by ESD!
T
he modules of the
phy
MOTION
TM
consist of sensitive electronic
components that can be destroyed by electrostatic discharge voltages.
- Always store and transport single modules in ESD protective
packaging.
- Always handle the components in compliance with the ESD protection
measures.
- No liability is accepted for any consequences resulting from improper
handling or non-ESD-friendly packaging.
