Manual I4XM01
MA 1279- A003 EN
16
5.2 Electrical Installation
Ensure sufficient bending radius of the cables during installation. Do not lay the cables in
tension or bend them.
We recommend labelling the mating connectors to prevent interchanging the connectors.
If all the connections are made, the last step is to plug in the power supply to the mains.
5.2.1 Connectors - Overview
Connector Number
of pins
Connector on the
module (Phoenix)
Mating connector
Mating connector
ID number
ServiceBus
X1
1x6 Tyco
Electronics
2-1761605-1/609-
0607
Harting female
connector 6 pin
(09185066803)
10009897
Electronic
wave
X2/X3
2x6 MCDN1,5/6-G1-
3,5P26
FMC1,5/6-ST-3,5
Phoenix
10013216
The mating connector is included in delivery of the module and is usually plugged into the
module at the factory.
i
CAUTION – Possible damage!
Damage of the module by wrong connection.
- Do not exchange the 6 pin signal connector (input/output)!
