Phytec phyCORE-i.MX31, Hardware Manual

Page: 107 / 135

The phyCORE-i.MX on the Development Board
©
PHYTEC Messtechnik GmbH 2007 L-700e_0
97
The pin-out of the connector X7 is shown in the table below:
Table 32: PHYTEC camera connector X7
P
IN
# S
IGNAL
N
AME
D
ESCRIPTION
1 VCC_3V3 Power supply
2 VCC_3V3 Power supply
3 GND Ground
4 GND Ground
5 CAM1_MCLK Clock output
6 GND Ground
7 CAM1_PCLK Pixel clock input
8 GND Ground
9 CAM1_DD0 Data 0
10 CAM1_DD1 Data 1
11 GND Ground
12 CAM1_DD2 Data 2
13 CAM1_DD3 Data 3
14 GND Ground
15 CAM1_DD4 Data 4
16 CAM1_DD5 Data 5
17 GND Ground
18 CAM1_DD6 Data 6
19 CAM1_DD7 Data 7
20 GND Ground
21 CAM1_DD8 Data 8
22 CAM1_DD9 Data 9
23 GND Ground
24 CAM1_LV Line start
25 CAM1_FV Frame start
26 GND Ground
27 CAM1_GPIO I²C address configuration
28 CAM1_SCL SCL Camera
29 CAM1_SDA SDA Camera
30 GND Ground
31 x_RESET_3V3 /Reset
32 VCC_3V3 Power supply
33 VCC_3V3 Power supply