manualshive.com logo in svg

Phytec Linux-Kit phyCARD-M, Quick Start Instructions

Share
Download
Phytec Linux-Kit phyCARD-M Quick Start Instructions Download Page 47

phyCARD-M 

Getting More Involved

 

In the end, you need the following files: 

•

 

ptxdist-2004.04.1.tgz (Tool from our partner Pengutronix, that 
configures and compiles BSPs) 

•

 

ptxdist-2004.04.1-patches.tgz (Patches for the tool) 

•

 

OSELAS.BSP-Phytec-phyCARD-PD10.1.0.tar.gz (BSP for phyCARD-
M) 

•

 

arm-1136jfs-linux-gnueabi.OSELAS-1.99.3.2.tgz (ready-to-use 
toolchain) 

All files are downloadable from our ftp-server. Please create a temporary 
directory within your home directory, for example 

local/

, and copy the files 

into it. 

 

Now, open a new terminal if not already open and install PTXdist: 

 

•

 

Click the terminal icon on your desktop. 

•

 

Type the following commands to extract the PTXdist-archieves: 

cd local 

tar zxvf ptxdist-2004.04.1.tgz 

tar zxvf ptxdist-2004.04.1-patches.tgz 

•

 

Now you should check if all necessary tools are installed on your host. 
Therefor call the configure script: 

cd ptxdist-2004.04.1 

./configure 

© 2010  PHYTEC Messtechnik GmbH     L-746e_1 

43

 

Summary of Contents for Linux-Kit phyCARD-M















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands