phyCARD-M
Quick Start Instructions
translation layer that enables the use of a traditional file
system with the device. Instead, it implements a log-
structured file system directly on the MTD. The file system
structure itself is recreated in RAM at mount time by JFFS2
through a scan of the MTD’s log content.
In addition to its log-structured file system, JFFS2
implements wear levelling and data compression on the MTD
it manages, while providing power-down reliability. JFFS2
can gracefully restart, and is capable of restoring a file
system’s content, without requiring outside intervention
regardless of power failures.
Troubleshooting:
If you don’t see any output in the Microcom window, check
the serial connection between the target and your host.
At the end of the setup, you had to restart the KDE desktop.
If you haven’t done yet, restart the KDE desktop now and try
again.
It is also possible that your user account is missing read and
write access to the serial interface:
•
Open the
YaST Control Center
.
•
Choose
Security and Users
.
•
Choose
User Management
.
In the line of your user name should be the group
uucp
.
•
If the group is missing, select your user name and click
the
Edit
button.
•
Select the tab
Details
.
32
© 2010 PHYTEC Messtechnik GmbH L-746e_1
