phyCARD-M
Quick Start Instructions
•
Use the drop-down box in the
Firewall Zone
settings to set the current
interface to
Internal Zone (Unprotected).
•
Then press
Next,
and in the following window click
Finish
to complete
the settings.
The firewall is now disabled for this network card.
2.2.4
Set Up TFTP Server
Later in this Quick Start you will learn how to write a new kernel image
into the flash memory of the target. To download the kernel image from the
target, you need have to have a TFTP server running. In this passage we
show you how to configure a TFTP server.
•
Open the
YaST Control Center
if it is not already opened.
16
© 2010 PHYTEC Messtechnik GmbH L-746e_1
