Phytec eGrabber-4plus, Hardware Manual

Page: 100 / 206

eGrabber-4plus
90 
PHYTEC Meßtechnik GmbH 2004 L-608e_4
5.2.2 Application of the De vice Driver for Windows NT4.0
The device driver functions in the same manner as in Windows 95; the
driver allocates physical memory to store images. The driver also
allows access to the eGrabber-4plus’ register.
In order to implement Windows NT4.0 with user specific applications,
use the included installation disk from Phytec.
These applications can be found on the installation CD, in the
PCIGRAB4\DRIVER\WINNT40 directory. The files stored in this
directory can be copied to a disk and run with user applications.
The user also has the option to create an installation program specific
to user needs. When creating this program, please take note of the
following points:
The driver must enter the Windows NT4.0 system into the register.
This can be done in the following manner:
•
The PCIGRABBER4.SYS file must be copied into the directory
labeled <Windows>\System32\drivers.
•
The driver is then entered into the Registry Table:
Use the REGEDIT program (located in the WindowsNT directory).
Scroll down the directory tree and select Services (see Figure 47).