15
Fuel System
Fuel Pick-Up Pipe Installation (Drill Option)
•
Drill mounting holes in tank to accommodate pick-up pipe as shown in Figure F4
•
Drill the two (1/4”) holes first as shown in Figure F5.
•
Drill a 7/8” hole as shown in Figure F6.
•
Mount the fuel pick-up assembly pipe as shown in Figure F4.
•
Position fuel pick-up 4” from bottom of tank for round tanks and 1” for flat tanks (cut tube as
necessary)
Fuel Line Connections
•
Route fuel lines from the fuel pick-up pipe to the heater.
•
Use only fuel lines provided (Other sizes or types of fuel lines may inhibit proper fuel flow)
•
Make proper butt joints using clamps and connector pieces as shown.
•
Use a sharp utility knife to cut plastic fuel lines to avoid fuel line pinching.
Figure F6
Figure F5
