21
Operating Switch Instructions
Operating Modes:
The heater has two different operating modes.
“Power Mode”
Controls the heat output level.
“Automatic Mode”
Establishes target cabin temperature for heater to maintain.
(Primary operating mode for cargo and cabin heating applications)
Note:
Internal temperature sensor inside heater is used to regulate the cabin temperature.
Temperature displayed on switch, only reflects temperature at operating switch.
Operating Mode Adjustments:
Switch between operating modes by momentarily
pressing the Operating Switch
Power Mode:
Adjust heat output level by rotating switch
Output level range is 1.1 -2.0
(0.1 intervals)
Automatic Mode:
Adjust target temperature by rotating switch
Target temperatures range is 10º C to 35º C
(1º intervals)
Self Diagnostics:
If ECU detects a problem during operation a fault
code will be displayed.
Refer to the diagnostics fault code legend for
further information.
Operating Modes:
The heater has two different operating modes.
“Power Mode”
Controls the heat output level.
“Automatic Mode”
Establishes target cabin temperature for heater to maintain.
(Primary operating mode for cargo and cabin heating applications)
Note:
Internal temperature sensor inside heater is used to regulate the cabin temperature.
Temperature displayed on switch, only reflects temperature at operating switch.
Operating Mode Adjustments:
Switch between operating modes by momentarily
pressing the Operating Switch
Power Mode:
Adjust heat output level by rotating switch
Output level range is 1.1 -2.0
(0.1 intervals)
Automatic Mode:
Adjust target temperature by rotating switch
Target temperatures range is 10º C to 35º C
(1º intervals)
Self Diagnostics:
If ECU detects a problem during operation a fault
code will be displayed.
Refer to the diagnostics fault code legend for
further information.
Operating Modes:
The heater has two different operating modes.
“Power Mode”
Controls the heat output level.
“Automatic Mode”
Establishes target cabin temperature for heater to maintain.
(Primary operating mode for cargo and cabin heating applications)
Note:
Internal temperature sensor inside heater is used to regulate the cabin temperature.
Temperature displayed on switch, only reflects temperature at operating switch.
Operating Mode Adjustments:
Switch between operating modes by momentarily
pressing the Operating Switch
Power Mode:
Adjust heat output level by rotating switch
Output level range is 1.1 -2.0
(0.1 intervals)
Automatic Mode:
Adjust target temperature by rotating switch
Target temperatures range is 10º C to 35º C
(1º intervals)
Self Diagnostics:
If ECU detects a problem during operation a fault
code will be displayed.
Refer to the diagnostics fault code legend for
further information.
Operating Mode Adjustments:
Self Diagnostics
Switch between operating modes by momentarily
pressing the Operating Switch
Power Mode:
Adjust heat output level by rotating switch Output
level range is 1.1 -2.0
(0.1 intervals)
If ECU detects a problem during operation a fault
code will be displayed.
Refer to the diagnostics fault code legend for further
information.
Automatic Mode:
Adjust target temperature by rotating switch Target
temperatures range is 10° C to 35° C (1° intervals)
