Clearing Transmitter Settings
You can return the settings for wireless shooting to their default settings.
Press function button 2 and 3 simultaneously for 2 seconds or longer, the transmitter
setting are cleared and the shooting mode returns to <ETTL>flash mode. Note that
even when the settings are cleared, the transmission channel, the wireless radio ID
and the C.Fn and P.Fn settings are not canceled.
III. MENU Functions
1.
FEB level
±
3EV
（
in 1/3-stop increments
）
2.
Flash exposure
compensation
±
3EV
（
in 1/3-stop increments
）
3.
C.Fn function
C.Fn -01 to 22
ETTL
RATIO A:B C
RATIO A:B
RATIO OFF
A:B ratio
setting:
8:1 to 1:8, in
1/2-stop
increments
4.
Flash Ratio
M/Multi
RATIO A:B:C
RATIO A:B
RATIO OFF
5.
Scan function
S
can the radio reception status and set the
master unit’s transmission channel
automatically or manually.
6.
Wireless radio ID
0000-9999
7.
Transmission
Channel
Ch.1-Ch.15and Auto
Save the present setting
Load the settings that were saved
8.
Memory Function
Back to shooting-ready state
Enable High Speed Sync
9.
Sync Mode
No display
First Curtain Sync
10
Firing group
Up to 5 firing groups A
、
B
、
C
、
D
、
E
（
at Gr
mode
）
11
Multi Stroboscopic
Flash Frequency
1-500Hz
12.
Multi Stroboscopic
Flash Number
1-100times, based on the frequency and flash
output
