display contrast
When the Phottix Laso transmitter is set as
master unit
（
radio transmission wireless
shooting, linked shooting
）
, select green as color
of the LCD panel illumination.
:LCD panel
illumination
color: Master
When the Phottix Laso transmitter is set as
master unit
（
radio transmission wireless
shooting, linked shooting
）
, select orange as
color of the LCD panel illumination.
When the Phottix Laso transmitter is set as slave
unit
（
linked shooting
）
, select orange as color of
the LCD panel illumination.
:LCD
panel
illumination
color: Slave
When the Phottix Laso transmitter is set as slave
unit
（
linked shooting
）
, select green as color of
the LCD panel illumination.
Enable the AF assist beam
: AF assist
beam
Disable the AF assist beam
USB port
The firmware of Phottix Laso
transmitter can be upgraded via the USB port, so as to
adjust its parameter and extend its compatibility with cameras to come in the future.
1.1 Connect the USB cable to the computer and the other end of the USB cable to
Phottix Laso transmitter’s USB port. A mobile device icon will be displayed on the
computer when successfully connected.
1.2 Double click to start the upgrade software. The upgrade software can be used to
check version info, and upgrade the Base software, RF software and Icon.
Click "Version" icon, the current version information of the connected Phottix Laso
transmitter will be displayed in the software window.
Click "Base software" icon, locate and double click on the FDS file from the pop-out
window. Then it starts loading the new firmware.
Click "RF software" icon, locate and double click on the RFC file from the pop-out
window. Then it starts loading the new firmware.
Click "Icon" icon, locate and double click on the FIF file from the pop-out window.
