frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Phottix Laso
Wireless Trigger for Canon/Transmitter
The Phottix Laso transmitter is used for wireless flash shooting. It can control up to 5
groups (15 units) of radio-enabled Canon Speedlites, as well as non-wireless Canon
ETTL Speedlites by using the Phottix Laso
receiver. The transmitter supports
multiple flash modes and shooting approaches including E-TTL II/E-TTL, Manual,
MULTI, Ext.A and Linked Shooting.
Table of Contents
I.
Parts
II.
Preparation Before Use
III.
The LCD Display
IV.
Wireless Flash Shooting: Radio Transmission
1.
Wireless Flash Setting
2.
ETTL: Fully Automatic Wireless Flash Shooting
3.
Using Fully Automatic Wireless Flash
4.
ETTL: Wireless Multiple Flash Shooting with Flash Ratio
5.
M:Wireless Multiple Flash Shooting with Manual Flash Output
6.
Multi:
7.
Gr: Shooting with a Different Flash Mode for Each Group
8.
Linked Shooting
V.
Setting Transmitter Functions with Camera Operations
VI.
Customizing the Transmitter
1.C.Fn: Setting Custom Functions
2.P.Fn: Setting Personal Functions
VII. Technical Specification
VII.
Trouble Shooting Guide
