The color of <LINK>lamp changes depending on the transmission status of the master unit and
the slave unit.
Note: 1).If the transmission channels of the master unit and slave unit are different, the slave unit
does not fire. Set both to the same number, or set both to “AUTO”.
2).If the wireless radio IDs of the master unit and slave unit are different, the slave unit
does not fire.
ETTL: Fully Automatic Wireless Flash Shooting
Phottix Laso transmitter attached to the camera (master) and a wirelessly controlled
flash (slave) can perform fully automatic wireless shooting.
1.
Autoflash Shooting Using One Slave Unit
1.1
Set the flash as the slave unit: For the slave unit setting, see the flash or the
Phottix Laso receiver’s instruction manual. Set A, B or C as the firing group. If set to
D or E, the flash does not fire.
1.2 Check the channel and ID: If the channels and IDs of the master unit and slave
unit are different, set them to exactly the same number.
1.3 Position the camera and the slave unit within the range of wireless radio
transmission.
1.4 Set the flash mode to <ETTL>: Press the <MODE> button on master and set the
flash mode to <ETTL>.The slave unit is set automatically to<ETTL> during shooting
via the control form the master unit. For slave units that use Phottix Laso receiver,
flashes on the receiver need not to set to wireless slave mode, but the need to be set to
ETTL mode manually during shooting.
1.5 Check the transmission status and that the flash is ready:
Check that the <LINK>lamp lights green;
When the flash that is set to wireless slave mode is ready, the AF-assist beam emitter
blinks at 1-second intervals;
Check that the < > slave flash-ready icon is lit on the master unit’s LCD panel;
Color Status
Description Action
Green Lit Transmission
OK
-
Lit
No connected
Check the channel and ID
Too many units
Master Units + slave units = 16units
or less
Red
Blinking
Error Turn
the
power off and on again
