way back to the left.
（
see picture 4
）
2.
Slide the Phottix Laso transmitter out of
camera’s hot shoe mount.
Turn On/Off the
Phottix Laso
transmitter
1.
Turn On: Press and hold the power button until MENU interface is displayed on
screen.
2.
Turn off: Press and hold the power button until the LCD screen goes blank.
Note: When
is displayed, please replace the batteries with new ones.
Checking the version info of the Phottix Laso
transmitter
You can check the present version information on Phottix Laso
transmitter: While
pressing the power button to turn on the transmitter, press the flash
<MODE>
button
simultaneously until the version info is displayed on the LCD screen.
< >:
Charge Lamp/Test Flash Button
1.
The charge lamp lights when the wireless shooting (slave) is ready.
2.
During wireless shooting, master unit’s charge up will be lit when all slave units
are fully charged.
3.
During wireless shooting, you can press the transmitter’s charge lamp (test flash
button to fire a test flash.
Remote Release from Slave Unit
When performing wireless shooting, Phottix Laso
transmitter supports remote release
(remote control shooting) from a flash set or Phottix Laso
receiver as a slave unit. For
operations, see the flash or Phottix Laso
receiver’s instruction manual.
Note
When using the remote release function, the slave unit camera might need a shutter
release cable (available separately) depending on the camera models.
1)
EOS digital cameras since 2012 do not need to use shutter release cable.
2)
EOS cameras before 2012, which are compatible with E-TTL II/E-TTL autoflash
