Photron FASTCAM ultima SE, User Manual

Page: 21 / 92

Processor Rear Panel Processor Rear Panel
SW1 AND SW2 SW1 AND SW2
There are two DIP switches behind this panel. SW1 configures the processor’s There are two DIP switches behind this panel. SW1 configures the processor’s
memory and the number of frames recorded in Random record mode. SW2 config-
memory and the number of frames recorded in Random record mode. SW2 config-
ures the external inputs and outputs. The switch positions not shown in the charts
ures the external inputs and outputs. The switch positions not shown in the charts
belows are factory presets and should remain undisturbed. User operated switch
belows are factory presets and should remain undisturbed. User operated switch
functions are as follows:
functions are as follows:
SW1 SW1
2-7 2-7
CAUTION CAUTION
DIP swithches should only be changed when the processor is off. DIP swithches should only be changed when the processor is off.
Function
1 2 3 4 5 6 7 8
512 Megabytes of memory OFF OFF
1024 Megabytes of memory
OFF ON
1536 Megabytes of memory
ON ON
Random Record 1 frmae
OFF OFF OFF
Random Record 2 frmae
ON OFF OFF
Random Record 3 frmae
OFF ON OFF
Random Record 4 frmae
ON ON OFF
Random Record 16 frmae
OFF OFF ON
Random Record 64 frmae ON OFF ON
Random Record 128 frmae OFF ON ON
Random Record 256 frmae
ON ON ON
Factory presets,DO NOT change
OFF OFF
KEYPAD TRIGGER(RECORD BUTTON)
OFF
SOFTWARE TRIGGER(RS232 COMMAND FROM PC)
ON
RS232C Baudrate 4800
OFF
RS232C Baudrate 9600
ON
OFF OFF
OFF OFF
ON ON