Photron FASTCAM ultima SE, User Manual

Page: 23 / 92

Processor Rear Panel Processor Rear Panel
SCSI SCSI
This is the Small Computer System Interface (SCSI) input connector. This connector This is the Small Computer System Interface (SCSI) input connector. This connector
accepts SCSI protocol commands from a computer and provides a data path for
accepts SCSI protocol commands from a computer and provides a data path for
digital video downloads. The connector type is a high density 50-pin female SCSI-2.
digital video downloads. The connector type is a high density 50-pin female SCSI-2.
SCSI LOOP THROUGH SCSI LOOP THROUGH
A SCSI connection to the next device on the SCSI bus, or if the Processor is the last A SCSI connection to the next device on the SCSI bus, or if the Processor is the last
device on the SCSI bus, an active termination plug should be inserted in this connec-
device on the SCSI bus, an active termination plug should be inserted in this connec-
tor. The connector type is an active high density 50-pin female SCSI-2.
tor. The connector type is an active high density 50-pin female SCSI-2.
REMOTE CONTROLLER REMOTE CONTROLLER
This connection is used for the keypad that is shipped with the FASTCAM ultima SE, This connection is used for the keypad that is shipped with the FASTCAM ultima SE,
and also with the supplied RS-232 serial adapter that allows the user to remotely
and also with the supplied RS-232 serial adapter that allows the user to remotely
control the imager from a host PC using the RS-232 command set. (See page 3-16
control the imager from a host PC using the RS-232 command set. (See page 3-16
for the command set)
for the command set)
AC IN CONNECTOR AC IN CONNECTOR
Standard IEC/CEE plug connector. Please refer to the data label just below the Standard IEC/CEE plug connector. Please refer to the data label just below the
connector for the correct voltage input and fuse ratings.
connector for the correct voltage input and fuse ratings.
FUSE BOX FUSE BOX
5A 5A
2-9 2-9