Photron Fastcam SA3, Hardware Manual

Page: 27 / 101

15 FASTCAM SA3 Hardware Manual
2.2.8. Power Supply Connector
This connector is the connector to input the DC power supply. Connect the supplied AC power
supply unit. A cable connector is available as an option. When using other power supplies, construct
a cable using the pin diagram below for reference.
DC 22-32V 60VA Pin
Diagram
PT02A-8-4P (023)
Connector Name Signal Name
Pin
No.
Camera body connector
model name
(Manufacurer)
Cable connector
model name
(Manufacturer)
DC 22-32V 60VA
N.C. A
PT02A-8-4P (023)
(Amphenol)
PT06A-8-4S (424)
(Amphenol)
SIGNAL GND B
POWER GND C
+22V - +32V IN D
When using the connector pins directly, refer to the chart above and ensure the wiring
is correct.
If the wiring is incorrect, not only is there the danger of the system malfunctioning, but
also of fire and electric shock.
Do not use a power supply which does not meet the system's specifications, or a
power supply you cannot guarantee the safety of.
By using a power supply outside of the system specifications, not only is there the
danger of the system malfunctioning, but also of fire and electric shock.
Warning
Warning