Photron Fastcam SA3, Hardware Manual

Page: 76 / 101

Chapter. 5 Product Specifications
64
5.1. Specifications
5.1.1. Product Specifications
60K type 120K type
Image Sensor CMOS image sensor
Sensor Resolution (full) 1,024x1,024 pixels
Max. Full Frame Rate 1,000 fps (1,024x1,024) 2,000 fps (1,024x1,024)
Max. Frame Rate 60,000 fps (128x16) 120,000 fps (128x16)
Min. Frame Rate 60 fps (1,024x1,024) *PAL is 50 fps
Sensor Size 17.4 mm x 17.4 mm
Pixel Size 17um x 17um
Recording
Color Depth
Monochrome 12-bit A/D conversion
Color 36-bit A/D conversion (RGB each 12-bit) Bayer color filter method
Shutter Electronic shutter
Recording Method IC memory
Recording Memory Amount 2 GB standard, 8 GB maximum
Trigger Method Start, Center, End, Manual, Random, Random reset, Two Stage
Gain Control Hardware LUT on camera, controllable via software or remote (optional)
Image Output Customization Customizable LUT, brightness is changeable
Partition Recording Max. 8 partitions recordable, independent recording settings possible
Ext. Sync. Input Signal 5Vp-p negative polarity/positive polarity (switchable)
Ext. Sync. Output Signal 5Vp-p negative polarity/positive polarity (switchable)
Trigger Input Signal TTL, contact
Other Output Signals Other timing signal outputs
External Control LCD remote controller (optional), RS-422 control, digital I/F (PC)
Video Output Signal NTSC/PAL
Digital Interface Gigabit Ethernet (1000BASE-T)