Photron Fastcam SA3, Hardware Manual

Page: 18 / 101

Chapter. 2 Setup
6
2.2. Part Names
The system is composed of components including the camera body, AC power supply unit, and the
"Photron FASTCAM Viewer" controls software (referred to below as PFV).
For each of the system components.
- Do not expose to shock outside of specifications.
- Do not use in an area with flammable gas or dust present.
- Do not place in an unstable location such as on a wobbly platform or an incline.
- Do not disassemble or modify.
- Do not expose to liquids such as water.
- Do not use in a manner where excessive force is applied.
- Only the accessories which fulfill a manufacturer's specification should be used for peculiar
accessories, such as an AC adaptor and a battery.
- Please use an external power supply with the suitable rating which was estimated by IEC/EN
61010-1 3rd Edition (complied with Cl. 6.3 and Cl. 9.4) or IEC/EN 60950-1 2nd Edition (complied
with Cl. 2.2 and Cl. 2.5), and separated from the main circuit by double insulation or reinforced
insulation.
2.2.1. Camera Body
The system has monochrome and color types, and additionally for each separate type there is a
standard 2 GB memory capacity type and a large capacity 8 GB type. You can select from these
types according to the desired application when purchasing.
The camera body contains IC memory for saving images and has been designed with the capability
to save high-speed images as uncompressed digital data. The camera body has a video output
connector that can playback recorded images on a video monitor, a Gigabit Ethernet interface to
connect a PC to fully control the camera or download data, and interfaces for various I/O
(input/output) connectors for external synchronization/trigger signals.
Apperance Rear