FASTCAM-512PCI Hardware Manual
- 42 -
Timing Chart for END, CENTER and MANUAL Trigger Modes
The below chart shows the temporal relationship of timing signals in END trigger mode. Note the
exposure, and consequently recording, ends as soon as a trigger comes in.
The above timing chart is for an End-Trigger operation.
The CENTER trigger mode ends recording after filling the latter half of the available memory. The
MANUAL trigger mode records a preset number of frames after a trigger comes in.
When shutter is used, the “shuttered exposure period” becomes shorter than what is shown as
“un-shuttered” exposure period in the above chart and it always takes place toward the end of, but
within, the then effective exposure period.
