01/2020
FCC Rules and Regulations
PhoXi 3D Scanner complies with the applicable requirements of FCC Part 2:2016 and FCC Part 15:2016 of
the FCC Rules and Regulations and Industry Canada ICES-003. FCC Class B DoC Report No. 2017262DOC
compliance report was issued by Rhein Tech Laboratories, Inc.
CE
The PhoXi 3D Scanner satisfies requirements and safety related objectives according to the EC directives
listed below. This CE mark is approved by Conformity Certificate No. 181299001; Technical Testing Institute
in Piestany.
EC Directive 2014/30/EU Electromagnetic Compatibility
■
Electromagnetic emission:
⌑
EN 61000-6-3:2007/ A1:2011 / AC:2012 Standards for residential, commercial and light-industrial environments
⌑
EN 61000-3-2:2014 Limits for harmonic current emissions
⌑
EN 61000-3-3:2013 Limitations of voltage changes, voltage fluctuations and flicker in public low-voltage supply
systems, for equipment with rated current
■
Electromagnetic susceptibility:
⌑
EN 61000-6-1:2007 Immunity for residential, commercial and light-industrial environments
⌑
EN 61000-4-2:2009 Electrostatic discharge immunity test
⌑
EN 61000-4-3:2006/ A1:2008/ A2:2010/ IS1:2009 Radiated, radio-frequency, electromagnetic field immunity
test
⌑
EN 61000-4-4:2012 Electrical fast transient/burst immunity test
⌑
EN 61000-4-5:2014 Surge immunity test
⌑
EN 61000-4-6:2014 Immunity to conducted disturbances, induced by radio frequency fields
⌑
EN 61000-4-8:2010 Power frequency magnetic field immunity
⌑
EN 61000-4-11:2004 Voltage dips, short interruptions and voltage variations immunity tests
Laser Classification
Laser class of the scanner is determined according to EN 60825-1:2014 Equipment classification and requirements
standard.
PhoXi 3D Scanners are primarily manufactured as laser class 3R devices. Models M, L and XL can be manufactured as laser
class 2 devices. The laser class was tested by an independent certification body Lasermet Limited which has issued
certification reports No. 1830, 1997b and 1962 for both laser classes.
All devices are labeled according to their respective class following rules given by the harmonized standard.
Details about laser device used can be found in the section
PhoXi 3D Scanner - User Manual and Installation Instructions
29/36
