Photon Focus MV1-D1280-L01-1280-G2-12, User Manual, Page: 45 / 139

5.1 Reduction of Image Size
S e n s o r I m a g e
O u t p u t I m a g e
Figure 5.11: Example of 2x2 binning
Property Type Description
BinningHorizontal Integer Number of pixels combined in binning in
horizontal direction.
BinningVertical Integer Number of pixels combined in binning in vertical
direction.
Binning_Bitshift Integer Additional left bitshift after binning (overflow is
ignored)
PixelFormat Enumeration If BinningHorizontal or BinningVertical is set to a
value bigger than 1 then the
Mono16
(16 bit) pixel
format is available (not available in DR1/QR1
models). Note that this reduces the maximal frame
rate.
SensorDigitizationTaps Enumeration (not available in DR1/QR1 models) This property
must be set to
One if PixelFormat = Mono16 and set to
Two otherwise.
Height Integer Height of the output image.
Width Integer Width of the output image. In DR1 models: value
of the property
WidthInterface
must be copied to
property Width .
Window_W Integer (applies only to DR1 models) This is the width of
the input image. E.g.
Window_W =2048 and
BinningHorizontal =2 will result in a width of 1024
in the output image after demodulation.
Table 5.2: Binning parameters
Binning may not be available on all camera revisions and models, see Appendix
B
Binning might increase the maximal frame rate. The dimension of the output image
determines the maximal frame rate.
.
MAN077 11/2017 V1.0 45 of 139