Photon Focus MV1-D1280-L01-1280-G2-12, User Manual, Page: 27 / 139

4
Product Specification
4.1 Introduction
The Photonfocus Luxima GigE camera series is built around the CMOS image sensor LUX1310
from Luxima, that provides a resolution of 1280 x 1024. The camera series is optimized for low
light conditions. The cameras are aimed at sophisticated applications in industrial image
processing where high sensitivity and high frame rates are required.
The principal advantages are:
• Resolution of 1280 x 1024 pixels
• Optimized for low light conditions
• Spectral range: 370 - 900 nm
• Global Shutter
• Micro lenses
• Gigabit Ethernet interface, GigE Vision and GenICam compliant
• Image burst mode: capturing of images into internal 256MB RAM at high frame rate
• Frame rates: 85 fps streaming and 948 fps image burst mode (@ 1280 x 1024 pixel).
• Advanced I/O capabilities: 2 isolated trigger inputs, 2 differential isolated RS-422 inputs
and 2 isolated outputs
• Up to 8 horizontal regions of interest (MROI)
• Up to 256 configurable sub areas arranged in a 16 x 16 matrix (ROI Elements)
• 2 look-up tables (12-to-8 bit) on user-defined image region (Region-LUT)
• Two crosshairs overlay on the image
• Image information and camera settings inside the image (status line)
• Image Binning
• Software provided for setting and storage of camera parameters
• The rugged housing at a compact size of 55 x 55 x 51.5 mm
3
makes the Photonfocus
Luxima GigE camera series the perfect solution for applications in which space is at a
premium.
• Programmable Logic Controller (PLC) for powerful operations on input and output signals.
• A/B RS-422 shaft encoder interface.
• Wide power input range from 12 V (-10 %) to 24V (+10 %).
The general specification and features of the camera are listed in the following sections.
MAN077 11/2017 V1.0 27 of 139