6
MAGNA
Liquid Crystal
RECOMMENDED ITEMS
• Extra gloves.
• Paper towels.
• Access to a sink with hot water to clean the
object.
• Air gun and air compressor (Optional)
• Access to Photocentric Resin cleaner and
Photocentric Wash99 unit.
CON
TENTS
For minimum computer requirements follow this
link provided:
https://photocentricgroup.com/
getting-started-studio/
1. Power Cord - to connect Magna with
mains power socket (please refer to Magna
Installation Guide,
https://photocentricgroup.
com/getting-started-lcmagna/
).
2. 16 GB USB Flash Drive - which contains
the following and later on you can use it to
manually transfer your files to Magna.
a Photocentric Studio Licence Number
b Resin Material Safety Data Sheet
c CE Certificate
d Link to LC Magna Resource Hub for support,
set-up and troubleshooting information.
https://photocentricgroup.com/lc-magna-
resource-hub/
3. Wi-Fi Dongle - to connect Magna to your
secure local wireless internet network.
4. Extraction Spigot Ø100mm - to connect Magna
to extraction unit (please refer to Magna
Installation Guide,
https://photocentricgroup.
com/getting-started-lcmagna/)
).
5. Paper Filter (x5) - to filter any solid debris or
cured resin while pouring into container. These
can be purchased from the shop:
https://
photocentricgroup.com/product/25-resin-
filters/
6. Funnel - To supporta paperfilter while pouring
resin back into its container, after print job
completion when cleaning Magna’s resin vat.
7. Spray Bottle - to assist cleaning intricate
parts. It can be filled by Photocentric Resin
Cleaner.
https://photocentricgroup.com/
product/photocentric-resin-cleaner/
8. Gloves - to prevent any skin contact while
handling the resin
9. Vat Cleaning Tool - or Squeegee tool. To swipe
and collect resin residue in the vat to resin
container. Also, to re-disperse resin pigments
in the vat, if printer has remained idle for a
long period.
10. Soft Spatula- to remove any small miniature
solid bits from vat film while cleaning. Or, to
remove cured resin from a minor vat leak.
11. Scraper - To remove printed part sfrom
Magna’s platform
12. Screwdriver - To be used when changing vat
film. • PZ2 Screwdriver - To be used when
changing vat film. • Vat gasket (x2) - To
replace used vat film.
13. Vat Gasket (x2) - To replace the foam gasket
between vat metal frames and vat walls, when
changing vat film.
14. Blow Peel Gasket (x2) —To create a seal
between the vat and the screen protector to
make sure the Blow Peel is effectively inflating.
15. Foam Tip Swap (x12)- To clean vat leak
sensors.
16. Pippete (x4)- To flush/clean vat leak sensors
Summary of Contents for Liquid Crystal MAGNA
Page 1: ...LC MAGNA USER MANUAL ...
Page 2: ......
