MAGNA
Liquid Crystal
Figure 24: Extraction panel removal.
3 GENERAL MAINTENANCE
1. It is essential to keep the top surface of your LC Magna clean and debris free. If this screen protector
gets damaged see Magna Resource Hub for guidance through replacing this.
https://photocentricgroup.com/lc-magna-resource-hub/
2. Vacuum the side panel fans every two months. It is important to keep fans dust free and avoid
overheating the electronic parts.
3. Make sure to lubricate the ball screw of linear drive, every 6 months or after 1000 hours of operation.
Please use suitable grease. We recommend a lithium soap based no2 grease.
4. If you would like to use extraction, you can connect LC Magna to your extraction network. First, remove
the extraction cover plate on the back panel of the printer. Then, bolt in the provided Extraction Spigot.
Magna is now ready to be connected to any extraction unit.
5. Change to: If there is a serious vat leak and it looks as though resin has entered the system, go to our
Magna Resource Hub for guidance. Dental Workflow:
https://photocentricgroup.com/using-your-lc-
magna-dental/
| Industrial Workflow:
https://photocentricgroup.com/using-your-lc-magna-industrial/
If the issue cannot be resolved using our Resource Hub contact
or
for American and American sub-continent (Central and South
America) customers.
All General Maintenance videos can be found
.
Summary of Contents for Liquid Crystal MAGNA
Page 1: ...LC MAGNA USER MANUAL ...
Page 2: ......
