background image

Information about the most 

common alarm components

Here, you will find descriptions of our most common alarm system components.
You can find more information about other components on our website.

INFORMATION ABOUT THE MOST COMMON ALARM COMPONENTS

13

Camera motion detector

Detects movement with infrared sensor (even at night) 
and in the case of an alarm takes and sends photos to 
the Alarm Receiving Centre for verification.

Security gateway

The central hub of the security system connecting 

all the components to the PhoneWatch secure cloud 

service with protected triple connection using 4G, WiFi 
and Ethernet. Supports Zibgee for selected smarthome 

devices. The only mains powered component of the 

alarm system and backed up with emergency battery.

Keypad

Keypad arms and disarms the alarm system and can be 

used to trigger an SOS. Acts also as a siren in case of an 
alarm. Each user has their own PIN code or keytag.

Keytags

Works as a secure access key. Simply touch the Phone-
Watch logo on the keypad to arm and disarm the alarm 

system.

Contact and shock detector

Detects if door or window is opened or closed. Also 

detects attempts to break the door or window by 
sensing the shock and vibration before the intruder can 
get in.

Water leakage detector

Water leaks can cause significant damage to your 
home. This detector identifies problems early so we 
can take action fast and minimize the damage.

12 

INFORMATION ABOUT THE MOST COMMON ALARM COMPONENTS

Optical smoke detector

Accurate detection of even the smallest amounts of 

smoke. Always on and always monitored, even when 

the alarm system is disarmed. Acts as an additional 

siren for your alarm system. We can verify fire visually 
from images on your cameras and call the fire 

department.

Smart plug

Control your lights and domestic appliances from 
your phone. Set your system to automatically turn off 
appliances (such as hair straighteners or the iron) 

 

when the alarm system is armed.

Remote control

Quickly arm or disarm the alarm system or trigger 

SOS from anywhere in the home. You can also 

easily check the current status of the alarm system.

Portable voice unit

Two-way voice unit with hands- free audio. Alarm 
Receiving Centre can always reach your home to verify 
the emergency and to assist you and your family. The 
voice unit is portable at home so you can take it with 
you during an emergency while we help you get to 

safety.

Summary of Contents for Smart Alarm










Reviews: