Phonetics SENSAPHONE EXPRESS II, User Manual

Page: 61 / 94

54 Sensaphone ® Express II User's Manual
Inquire Alarms:
To check alarm information, press INQUIRE and then ALARMS.
If there are any unacknowledged alarms, the Express II will
recite which input alarms have not been acknowledged. Other-
wise it will tell you that no alarms are active.
Halt Mode Delay Time
Halt mode allows you to disable all inputs and prevent dial out
for a user-programmed time. Halt mode is useful if you must
perform periodic tests or other activities that would trip false
alarms and initiate dial out. The Input lights will flash red for the
duration. Halt mode can be programmed from 0 seconds to 12
hours.
To initiate Halt mode press the orange HALT button. To exit
Halt mode press ALARM CANCEL.
NOTE: If you program the halt mode time to zero, the halt mode
feature is disabled. The default setting is 1 hour. (See also
"Halt mode delay time" as part of the System programming
section of Chapter Five.)
6) Dump Programming
is useful only when a
printer with a serial port is
connected to the Express
II. It does not reset or
clear settings. For that,
consult "System" in
Chapter 5.
Inquire Alarms:
1) Press Inquire
2) Press Alarms
INQUIRE
ALARMS