Enterprise Telephone User Guide
15
Safety and Regulatory
When using the Enterprise Wireless Desktop Terminal, follow these safety precautions to reduce the risk
Of electric shock and personal injury:
1.
Read and
understand all instructions.
2.
Unplug the unit from the wall outlets before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
3.
Do not use this unit near water (example: a bathtub).
4.
This unit should not be placed near or over a radiator or heat register.
5.
Do not overload wall outlets and extension cords as this can result in the risk of fire or electric
shock.
6.
Use only the power source supplied with the unit.
7.
Do not disassemble this unit; take it to a qualified serviceman when service or repair is required.
Opening or removing covers may expose you to dangerous voltages or other risks.
8.
Do not use this unit to report a gas leak in the vicinity of this unit.
9.
Unplug this product from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
a.
When the power supply cord or plug is damaged or frayed.
b.
If the product has been exposed to rain, water or liquid has been spilled on the product,
disconnect the unit and allow it to dry out. Once dry, it may be tested too see if it still
operates; however, do not open up the product.
c.
If the product housing has been damaged.
d.
If the product exhibits a distinct change in performance.
10.
Avoid using the product during an electrical storm. There may be a remote risk of electric shock
from lightning.
FCC notices
This unit has been tested and found to comply with the limits for a Class x digital device as specified in
Part 15 and Part 68 of FCC rules. These limits provide reasonable protection against radio and TV
interference in a residential area. However, your equipment might cause TV or radio interference even
when operating properly. To eliminate interference, try one or more of the following corrective
measures:
a. Relocate or reorient the TV or radio.
b. To the extent possible, increase the distance between the equipment and the TV or radio.
c. Use outlets on different electrical circuits for the equipment and the TV or radio.
Changes or modifications not expressly approved by the party responsible for compliance could void the
users authority to operate the equipment.
