VP1-250-eSSD User’s Manual
- 7 -
Rev. C - 7/20
Specifications
Physical:
Form Factor:
3U VPX bus 6.30" (160mm), 3.94" (100.0mm)
Module Interface:
PCIe x4 (Gen 2 or 3)
Flammability:
UL94V-0 – PCB made in the USA by a UL recognized manufacturer
Environmental:
Air Cooled Temperature (VP1-250-eSSDA):
0° to 55° C (Air flow requirement as measured to be greater than 200 LFM)
Conduction-cooled with REDI (Vita 48) covers Temperature (VP1-250-eSSDC):
-40° to 85° C (Module MUST operate in a fully installed Conduction Cooled, REDI cover
rack)
Vibration:
3.1 G
RMS
5–800Hz at 30 min/axis
Shock:
1500G @ 0.5ms half-sine
Storage Temperature:
-55° to 105° C
Relative Humidity:
5 to 95 percent, noncondensing
MTBF:
24,800,000 Hours @ 25° C (without drive).
* Must use a Solid State drive capable of temperature range and shock and vibration.
Compliance Specifications:
The VP1-250-eSSD SATA/SAS Drive Module is designed to meet CE Emissions specification EN
55022, CE Immunity specification EN 50082-2 and FCC 47 CFR, Part 15, Class A when tested in
a shielded enclosure. Meets VITA 46.0, 48.2 and 65: VPX System Specifications and Practices.