Instruction manual
The DigiVoice system has a transformer-balanced „100V IN“ (+50dB) interface input for direct signal infeed from the
speaker network, two RJ-45 jacks (INPUT-LINK) for easy network and configuration of multiple DigiVoice systems (CAT-5
line) and a mains input terminal 230VAC.
Important:
In every place where no network lines (CAT-5) for the network of the DigiVoice systems may be passed, the
DigiVoice DSP-line arrays can be connected directly to old, existing 100V lines to the internal 100V-Audio-IN input.
After programming and measurement of the system via PC, the network lines and the programming interface
may again be removed.
The speakers are mounted flat at the wall. By the included software the acoustic characteristics are adapted to the local
conditions.
All active Digivoice Line Array systems have a modern switching power supply and fully digital 8 resp. 16 channel CLASS-D
power amplifier with DSP.
The Digivoice-110.8 DSP2 and Digivoice-220.16 DSP2 are controlled by the supplied system software ACML-CONTROL
1.5. The friendly designed user interface allow an easy and intuitive control operation in the range Audio-DSP and sound
directivity.
Only four main parameters are entered into the software ACML-CONTROLL 1.5 by the user:
1.-Mounting height
2.-Beam range
3.-Beam height
4.-Opening angle
The parameterization is done by the system via digital DSP control automatically.
5- Equalization with PEQ
To use the DigiVoice system correct and to apply all technical possibilities, you have to make a room adjustment control
resp. room equalization after the installation.
The DigiVoice systems are assembled with magnetostat sound converters and special positioned broadband chassis.
The frequency-independent directing sound is only limited to the audience area and supplies highest acoustic and
natural speech reproduction. In this way the sound reflections of the room is reduced to a minimum and the syllable
comprehensibility (
STIPA values)
improved enormous.
For the range and assembly of the particular line sound emitters please see the specifications.
These active DSP supported Line Array systems with their expanded frequency range in the tweeter range (magnetostat
sound converter) are excellent suitable for speech- and music transmission, and in connection with a SUB WOOFER to
consider as „FULL RANGE“ system.
GENERAL INORMATION and SYSTEM DESCRIPTION
Copyright 2012 Phoenix Professional Audio GmbH, www.phoenix-pa.com
The Phoenix logo is registered at the German Patent and Trademark Office (TM).
All brands are properties of their respective owners.
Summary of Contents for DigiVoice-110.8 DSP2
Page 20: ...Instruction manual NOTES...
