Phoenix 4400- DHP
November 2017
13
12c. Thermal Film Shaft Brake Assemblies
To remove wrinkles in the film web, tighten the brake adjustment knobs on each film
supply shaft.
i. Rotating the disc to compress the spring will increase brake tension, see
the red arrow.
ii. Rotating the disc in the opposite direction decreases brake tension.
Note: Do not overly tighten the brake tension. Apply only enough tension to the film
web to smoothen out wrinkleless before they enter the laminating nip point.
12d. Support Cradles and Alignment Arrows
The thermal film supply shafts have locking screws and alignment arrows indicating
which way they are to be loaded on the machine. Always insert the shaft with the arrows
aligned on the shaft and the side frame; tighten the screw to hold the shaft in place.
Locking screw
Alignment arrows
Tension adjustment
di
Compression spring