background image

INTRODUCTION

Congratulations  on  the  purchase  of  your  laminator.  Now  you 
can  protect  your  favourite  documents  up  to  A3  size  such  as 
photographs,  certificates,  ID  cards,  letters  etc.  in  a  water 
resistant,  airtight  seal.  Follow  the  instructions  for  proper  use 
and keep this manual for future reference. 

IMPORTANT SAFEGUARDS

When  using  electrical  appliances,  basic  safety  precautions 
should always be observed including the following: 
1. Read all instructions. 
2. Do not touch hot surfaces.   
3. To  protect  against  risk  of  electrical  hazards,  do  not 

immerse  cord,  plugs  or  the  appliance  in  water  or  other 
liquid. 

4. Close supervision is necessary when the appliance is used 

near children.   

5. Unplug  from  the  outlet  when  not  in  use  and  before 

cleaning. Allow to cool before cleaning the appliance.   

6. Do not operate any appliance with a damaged cord or plug 

or after the appliance malfunctions, or has been damaged 
in any manner.   

7. Do not use outdoors. 
8. Do  not  use  the  appliance  for  anything  other  than  the 

intended use.   

9. Ensure the laminator is turned off when you have finished 

laminating. 

10. The  mains  socket  should  be  near  the  equipment  and  be 

easily accessible. 

11. Do  not  laminate  sheets  containing  metal  or  conductive 

materials.   

12. If  you  are  laminating  a  small  or  irregular  shape,  please 

insert a 2cm/3cm strip of paper against the closed end of 
the pouch as shown in the diagram, to prevent jamming. 

A  short  power  cord  may  be  provided  with  this  appliance  to 
reduce  hazards  resulting  from  becoming  entangled  in  or 
tripping over a longer cord. Extension cords may be used if care 
is  exercised  in  their  use.  If  an  extension  cord  is  used,  the 
following must apply:   
a. The marked electrical rating should be at least as great as the 

electrical rating of the appliance. 

b. The extension cord should not drop over the counter top or 

tabletop where it can be pulled on by children or tripped over 
accidentally.   

PART NAME 

NOTES 

We  do  not  recommend  laminating  any  type  of 
self-developing photo.   
Any photo to be laminated must be dry before processing.   
Do not laminate any documents that appear thick or heavy, 
as this will get stuck in the laminator (with the thickness 
thicker than 0.4mm). 
Very thin paper inserted into very a thin pouch may cause 
twists and jam the laminator. 
In order to avoid creasing, please DO NOT insert the open 
side of the film into the laminator first. 
When the film exits after being laminated, it may be very 
hot and soft . Handle the newly laminated item with care. 
Pressing the item with a book or other heavy objects may 
help.   
This product bonds the laminate sleeve to the item being 
processed .It is a permanent seal and cannot be removed. 
We do not recommend laminating any collector’s items of 
value or any item you may wish to remove at a later date. 
Do not attempt to laminate coins or thicker items. 

HOW TO USE

1. Insert the mains plug into an electric socket and slide the 

power  switch  to  the  left  or  right  based  on  the pouch  you 
use. The POWER indicator will light up.   

2. Wait 5-6 minutes for the machine to warm up. Once it has 

reached laminating temperature, the READY indicator will 
light up. 

3. Place the item to be laminated into the laminating pouch, 

and  centre  it  within  the  pouch.  Please  ensure  that  your 
document  or  picture  is  positioned  as  close  to  the  sealed 
edge as possible ensuring there is a margin of 3-9 mm left 
between  the  item  to  be  laminated  and  the  edge  of  the 
pouch. 

(4) Laminator entry

(3) Power switch

(5) Guide plate

Release Button
press to release
 jammed paper

(1) Power indicator

(2) Ready indicator

folded  A3  sheet  of  paper  into  the  feeding  slot  of  the 
laminator  (folded  edge  first).  The  paper  will  come  out 
with any residue present. Repeat several times to clean the 
roller. 
Never clean with scouring powders or hard implements. 
Wipe clean with a soft cloth. 

SUGGESTED USES

Photographs                                        Legal documents       
Recipe cards                                        Letters                   
Membership cards                              Point of sale             
Fishing license                                    Luggage tags       
Certificates                                          Homemade bookmarks   

TECHNICAL    DATA

Voltage      -----------------------------    240V/50~60Hz

             

Power        --------------------- -------    Max. 400W       
Current      -----------------------------    1.6A           
Film thickness    ----------------------    80-150 micron           
Max. document size    ---------------    A3  size           
Warm up time        -------------------    Approx.5-6 min       
Laminating speed    ------------------    Approx.24~25cm/min
Max. document thickness -----------    0.4mm               

POUCH SPECIFICATIONS 

1. Please  make  sure  that  enough  margin  (3-9  mm)  is  left 

between  the  item  to  be  laminated  and  the  edge  of  the 
pouch.   

2. Do not trim the pouch prior to laminating. 
3. Please  ensure  that  good  quality  pouches  of  the  specified 

thickness  (stated  above)  are  used,  as  this  will  reduce  the 
risk of jamming and prolong the life of the laminator.             

----------    SAVE THESE INSTRUCTIONS    --------   

A3 HOT LAMINATOR

 Operating Instruction

 LM3211H

The  laminator  can  laminate  film  between  the 
thicknesses of 80-150microns.   
The laminator works with most types of heat-sealing 
laminating pouches.   

4. Insert the sealed edge of the laminating pouch directly into 

the laminator opening until it is caught and drawn in (no 
carrier is required), take care to ensure that the document is 
straight and centrally positioned.   

5. Remove the pouch from the rear of the machine after it has 

stopped moving.   

ROLLER RELEASE BUTTON

1.   If a pouch jams in the laminator, slide the power switch to 

off, switch off and remove the mains plug. 

2.   Press the roller release button on the back of the laminator 

and gently pull the pouch out of the entry slot. 

3.  Do not insert tools or other objects into the entry slot as this 

may damage the rollers. 

MAINTENANCE 

Do not operate the laminator more than 2 hours at a time. 
Wait at least 15 seconds between every laminating items. 
Allow  the  laminator  to  cool  at  least  30  minutes  after 
turning off.   
Do not touch or place anything on hot the surfaces, wait 
for the unit to cool before moving or cleaning. 

CARE AND CLEANING 

To  reduce  the  risk  of  fire  or  electrical  shock,  do  not open  the 
unit. No user serviceable parts are inside. 

Keep your hands and the cord away from hot parts of the 
appliance during operation. 
Since  deposits  can  built up  over  a  period of  time  please 
clean  the  rollers  periodically  after  use  by  inserting  a 

Please read the instruction before using the unit.

Reviews: