Phoenix 4400- DHP
November 2017
2
1.
Introduction
Thank you for choosing the Phoenix 4400-DHP laminator. It has been designed and manufactured to
provide years of continuous service. Please read this manual thoroughly before operating. Please
inspect the box and the laminator for shipping damage. Damage should be brought to the attention of
the delivering carrier immediately.
We reserve the right to make changes to this publication and to the products described in it without
notice. The details given in this manual are based on the most recent information available to us. They
may be subject to change in the future. We retain the right to make changes to the construction or the
design of our products without accepting any responsibility for modifying earlier versions.
WARNING! Any unauthorized changes or modifications to this unit without our prior written approval
will void the user’s warranty and will transfer health and safety obligations to the end user.
CAUTION! Please pay attention to all passages with these symbols. This information is
vital to preventing user injury and/or damage to the unit. Failure to follow this information could void
the user’s warranties and transfer all safety obligations to the user.
2. Important Safety Instructions
In this operating manual, you will find important safety messages regarding the product. Read these
instructions carefully, failure to comply with the following safety procedures could result in serious
injury.
WARNING
Do not attempt to service or repair the laminator. Only authorized maintenance
and service technicians should make repairs.
WARNING
Do not connect the laminator to an electrical supply or attempt to operate the
laminator until you have completely read these instructions. Maintain these
instructions in a convenient location for future reference.
WARNING
To guard against injury, the following safety precautions must be observed in the
installation and use of the laminator
WARNING
Ensure the
safety shield is in place before operating the Laminator. Operating
without the safety shield can cause serious injury
3.
Installation Safeguards
•
Shipping damage should be brought to the immediate attention of the delivering carrier.
•
Avoid locating the laminator near sources of heat or cold. Avoid locating the laminator in
the direct path of forced, heated or cooled air.
•
The receptacle must be located near the equipment and easily accessible.
•
Connect the power cord provided with the laminator to a suitably
grounded
outlet
only. This machine must have reliable earth ground wire to ensure the safety of the
machine during operations.
