Page 18
SECTION 5: COMPONENT PLACEMENT
Please note (again!): the sketches in this manual are not drawn to scale and are
very simplified. Their purpose is to offer you a visual aid when installing your BIG
SOUND.™
If you have removed the connector PCB board, you have freed up extra room for
your sound system. But even if you chose to leave the connector PCB in the wiring
system, there is still plenty of room for all the kit components. Here is the component
placement we suggest:
lead weights
original connector
PCB position
9V NiCd battery
7.2V use rating
BIG BOOST™
volume
control
BIG SOUND™
LOOKING UP INSIDE
TENDER SHELL
Install Big Boost™
at an angle in the
opening.
LOOKING DOWN ON FLOOR
OF TENDER
speaker
