MEGAMAT XS
Installation
73115 4.0
19
6.2.1
An installation example
Before installing the drive, make sure that you are observing all of the safety notices found in the
"Safety notices to observe during installation" section.
CAUTION
The mains power cable should be unplugged during the installation.
Figure 7
Installing the drive (example)
A
Safety clip
B
Bracket for securing the drive (on the stroke
pipe side)
C
Head of stroke pipe
D
Mounting bolt
E
Gear clevis
F
Bracket for securing the drive (on the motor
side)
In the following example, installation of the MEGAMAT XS drive into the end product is shown us-
ing the mounting bolt.
Certain details may change because of technical changes.
1
Move your product into a position where it is supporting no load.
2
Push the drive's gear clevis (
E
) onto the bracket (
F
).
3
Insert the mounting bolt (
D
) into the bracket (
F
).
4
Secure the mounting bolt (
D
) with the safety clip (
A
).
A
B
E
F
D
D
C
A
B
