MC11 Control Unit
Installation
66650 6.0
19
Opening the shield cover
Figure 10
Opening the shield cover on the MC11 control unit
1
Pull out the mains plug from the outlet.
CAUTION
You should only connect and disconnect the cables when they are completely dis-
connected from any live current!
2
Use a suitable tool to press the three locking clips down in the notches as shown in Figure 10.
At the same time, tilt the shield cover forward so that the clips come out of the notches.
3
Remove the shield cover.
4
You can now connect or disconnect a plug and socket. Be sure to use the proper socket (the
assignments of plugs to sockets in shown in the connection layout diagram). (Figure 2 shows
the connection positions.)
