General Information
These instructions are intended for the manufacturer of the end product
and are not
designed for passing on to the operator of the end product. With regard to the specialist
information contained herein, these instructions can serve as a basis for drawing up the
instructions for the end products.
It is essential to note the information contained in these instructions!
In doing so, you
can prevent mistakes being made in installing or connecting the system which could result
in…
Ÿ
injury
and
accidents
as well as
Ÿ
damage
to the drive system or the end product.
To supply the voltage, use only a
DC power supply!
DewertOkin
The
DC power supply includes an earth-free electric circuit which is isolated
DewertOkin
from the supply voltage via double or reinforced insulation.
DewertOkin
accepts no liability
for damage caused as a result of …
Ÿ
non-observance of these instructions,
Ÿ
alterations to the product not approved by DewertOkin or
Ÿ
the use of spare parts not manufactured or approved by DewertOkin - these may
not ensure adequate safety!
Due to the policy of ongoing product improvement, DewertOkin reserves the right to carry
out technical changes at any time without prior notification!
2
Contents
page
General Information......................................................................................................
2
Designated Use.............................................................................................................
3
Prerequisites.................................................................................................................
3
Getting to Know the System.........................................................................................
4
Fitting............................................................................................................................
6
Operation..................... ................................................................................................
8
Maintenance and Repairs.............................................................................................
9
T
10
ype Label....................................................................................................................
Design of the CU155 Drive Control Unit.......................................................................
11
Troubleshooting............................................................................................................
12
Cleaning and Care........................................................................................................
13
Declarations of Conformity ...........................................................................................
14
1. Designated Use
The
CU155
drive control unit is
designed
for installing in end products...
Ÿ
to control motorised adjustment devices in movable furniture components (e.g.
beds, chairs...)
The
CU155
drive control unit is
not intended for use
…
Ÿ
in an environment where
inflammable
or
explosive
gases or vapours (e.g.
anaesthetics) are likely to occur,
Ÿ
in a damp environment, i.e. outdoors
Ÿ
in beds intended for cleaning in wash tunnels
Ÿ
in applications in which inadvertent movements are not prevented by appropriate
technical measures.
2. Prerequisites
The installation steps described in these instructions must be performed by a
fully
trained
electrical engineer
.
Ÿ
This being the case, you should never carry out this work
yourself
unless you are a
qualified electrical engineer
or
Ÿ
you should
entrust
this work to suitably
qualified persons
only.
Conformity according to EC Directives
The
CU155
drive control unit is supplied ex factory as a machine
not ready for use
in
accordance with the EC "Machinery" Directive. In other words, you may not put the drive
control system into operation until you have met the
safety objectives
of the "Machinery"
Directive and issued a corresponding
Declaration of Conformity
!
The drive control unit with DewertOkin DC power supply meets the safety objectives of the
EC Directives concerning
Low voltage
and
Electromagnetic Compatibility (EMC).
The
CU155
drive control unit is
not a medical product
- for installing into same,
manufacture in
conformity
with the EC Directive for Medical Products or other regulations is
the responsibility of the
manufacturer of the end product
.
3
CU155
03/2020
ID 49623 3.0
03/2020
ID 49623 3.0
Summary of Contents for DewertOkin CU155
Page 15: ...15 03 2020 ID 49623 3 0...
