12
13
10. Cleaning
The
CU155
drive control unit has been designed to facilitate cleaning for the user, and this
has been made even easier thanks to the large number of flat surfaces.
The
CU155
drive control unit should be cleaned with a household cleaning agent suitable for
ABS
using a damp cloth. Always note the instructions provided by the manufacturer of the
respective cleaning agent used.
Before cleaning, always pull out the mains plug!
Never clean
the
CU155
drive control unit in a wash tunnel or with a
high-pressure cleaner
nor spray liquids onto it
. You otherwise risk damaging the equipment!
When
cleaning
, take care not to
damage
the
connection lead
!
Do not use any solvents
such as
benzene
,
alcohol
or similar substances.
11. Disposal
The
CU155
drive control unit consists of electronic components, cables and metal and
plastic parts. You should observe all corresponding national and regional environmental
regulations when disposing of the
CU155
drive control unit.
The disposal of the product is regulated in Germany by Elektro-G, internationally by the EU
Directive 2012/19/EC (WEEE), or by any applicable national laws and regulations.
The
CU155
drive control unit should not be disposed of with the normal household
waste!
When handsets is
activated control unit
does not react a
dequately and shows
malfunction
- Handset or drive system defective - Contact your supplier/
dealer
- Thermoswitch on transformer or in
the DEWERT controls has possibly
been triggered
- Temperature fuse in transformer
has possibly been triggered
- Instrument fuse has possibly been
triggered
- Lead (mains and/or handset/slave
drives) interupted
- No supply voltage
- Leave the drive system in
the rest position for approx.
20-30 minutes
- Contact your supplier/
dealer
- Check the lead, if
necessary restoring contact
Drives suddenly no
longer respond, no
movement takes
place
Possible Cause
Remedy
Problem
Handset or drive
system without
function
- Handset or drive system defective
- No supply voltage
- Contact your supplier/
dealer
- Connect to mains
9. Troubleshooting
The following table has been developed to help you detect and eliminate common faults and
errors. If you come across a fault/error that is not listed here, please contact your supplier.
All of these faults/errors may only be inspected and rectified by specialists holding the
qualifications as described on page 3.
CU155
03/2020
ID 49623 3.0
03/2020
ID 49623 3.0
Summary of Contents for DewertOkin CU155
Page 15: ...15 03 2020 ID 49623 3 0...
