Installation
DUOMAT 9
24
79338 4.0
10
Connect all of the additional functionality (optional features such as slave drives, controller key-
pad, battery, etc.). (Refer to section 3.1 "Layout of system connections".)
11
Close off the unused sockets using dummy plugs. The dummy plugs ensure that the sockets
are properly protected against any splashed water.
WARNING
The appropriate pluggable power supply cord is included, depending on the regional
version (USA, EURO continental Europe, the UK or Australia). Only use the proper
power cable that is permitted in your country. Be sure to use the correct plug shape
(refer to Figure 7).
The power cord
(K)
should be plugged into the power socket
(J)
at the front of the DUOMAT 9 dou-
ble drive.
Figure 16 Plugging the power cord into the DUOMAT 9
J
Power socket
K
Power cord
C
Motor cap
L
Screw
12
Insert the power cord plug (
K
) into the mains socket (
J
) on the DUOMAT 9.
13
Screw the cover (
A
: optional) back onto the rear of the drive.
14
Put the motor cap (
C
) back onto the DUOMAT 9. Use the two screws (
L
) to secure the motor
cap.
15
Insert the mains power plug into a power outlet.
L
C
J
K
L
Summary of Contents for Dewert Okin DUOMAT 9
Page 1: ...DUOMAT 9 Installation Instructions Translation of the original installation instructions...
Page 2: ......
Page 42: ......
Page 43: ......
