Phoenix Mecano Dewert Okin DUOMAT 9, Installation Instructions Manual

Page: 10 / 44

Safety notices DUOMAT 9
10 79338 4.0
The DUOMAT 9 can be used by children of 8 years and older, persons with reduced physical, sen-
sory or mental capabilities, or persons with lack of experience or knowledge when they are super-
vised or instructed concerning the safe use of the device and when they understand the resulting
risks. Do not allow children to play with this device. The cleaning and user maintenance must not
be carried out by children without supervision.
CAUTION
You should only use spare parts which have been manufactured or approved by Dew-
ertOkin. Only these parts will guarantee a sufficient level of safety.
Optional: mechanical reset function which functions without mains power
CAUTION
The mechanical reset function operates without mains power. It is not a safety system
in the sense of security and is not intended for continuous use.
DewertOkin does not guarantee that the drive will function in the event of a power outage.
If the end-product manufacturer chooses to guarantee the functionality of the end product during a
power outage, then the end-product manufacturer is responsible for arranging a mechanism to en-
sure this functionality.
Using the drive systems in medical applications
This DewertOkin product complies with the safety requirements found in IEC 60601-1.
We strongly recommend that the end product (including all its components) which you are manu-
facturing for a medical application should also comply with the safety requirements found in IEC
60601-1.
You should make sure that the mechanical movement of the motor in your end product poses no
risk of injury. Conduct a risk analysis for the end product for this purpose. You should also include
safety notices in the instructions for the end product and technical safeguards in your product to
eliminate any risk.
2.2 Safety notices within the installation instruction and the operating instruc-
tions for the entire machine
The manufacturer of the end product is only permitted to operate the DUOMAT 9 (by itself an in-
complete machine)

when the end product (for which the DUOMAT 9 is intended) is in compliance with all protective
measures specified in the Machinery Directive 2006/42/EC, and

when the manufacturer expressly declares the compliance of the end product.
The manufacturer of the end product must create a manual for the users of that product. The safety
notices in the end-product manual must be written based on the end product's risk assessment.