Phoenix Mecano Dewert Okin DUOMAT 9, Installation Instructions Manual

Page: 18 / 44

Technical specifications DUOMAT 9
18 79338 4.0
5.
Technical specifications
Mains power supply connection 100 V - 240 V AC, 50/60 Hz (refer to the ratings plate on
the drive)
Current consumption at rated load 4.0 A
– 1.5 A (depending on power connection)
Push force Max. 6000 N, depending on version (refer to the ratings
plate on the drive)
Pushing force of the ER/SB Max. 4500 N, depending on version (refer to the ratings
plate on the drive)
Mode of operation 1 under max. rated
load.
Intermittent duty 2 min./18 min.
Protection class II
Noise level
≤ 65 dB(A)
Current consumption of all drives
2
Max. 5 A DC for intermittent duty 2 min / 18 min
Drive type Double drive
Drive options DUOMAT 9, DUOMAT 9+1, DUOMAT 9+2
Protection degree IPX4
Stroke 87, 81, 69 mm
Length x width x height 733 mm x 191 mm x 131 mm
733 mm x 193 mm x 131 mm (ER/SB)
Axle gap distance 581 ±2 mm
Diameter of axle support Ø 25 mm, Ø 34 mm (depending on application)
Weight Max. 6.3 kg
Ambient conditions for operation, storage and transport
Transport / storage temperature From -20 °C to +50 °C
From -4 °F to +122 °F
Operating temperature From +10 °C to +40 °C
From +50 °F to +104 °F
Relative humidity From 30% to 75%
Air pressure From 800 hPa to 1060 hPa
Height < 2000 m
1
Mode of operation: intermittent duty 2 min./18 min. This means that after the unit is operated with its rated
load for up to two minutes it must then be paused for 18 minutes. The system can malfunction if this pause
is not observed!
2
No more than two drives may be operated at rated load simultaneously!