Operating notes
ACCUCONTROL
38
59245(e)
Figure 20
Charging the ACCU AC 4.5 and ACCU AC 4.5DC at the charging station
A
PLUG-IN CHARGER PB 4.5
B
Plug for the PLUG-IN CHARGER PB 4.5 at
the charging station
C
Charging station
D
ACCU
5
Connect the PLUG-IN CHARGER PB 4.5 to the charging station (as shown in Figure 20).
6
Plug the PLUG-IN CHARGER PB 4.5 into the outlet. The charge level of the ACCU is indicated
by the LED on the PLUG-IN CHARGER PB 4.5 as follows:
- LED is flashing green: the ACCU is charging,
- LED is steady green: the ACCU is fully charged.
7
When the LED on the PLUG-IN CHARGER PB 4.5 is steady green,
- pull the PLUG-IN CHARGER PB 4.5 out of the outlet and
- unplug the PLUG-IN CHARGER PB 4.5 cable from the charging station.
8
Take the ACCU out of the charging station's rails.
9
Push the ACCU onto the CONTROL's mounting rail (as described in section
7.3).
10
Pull gently on the lead battery to make sure that the ACCU is properly seated on the mounting
rail.
11
Allow the ACCU to rest for about 1 hour after charging it; this will prolong its lifespan.
D
C
A
B
