Operating notes
ACCUCONTROL
26
59245(e)
7. Operating notes
The factual information contained within may be used when you are creating the end-product man-
ual. The installation instructions do not contain all information required for the safe operation of the
end product. They only describe the assembly and operation of the
ACCUCONTROL
as a partially
assembled piece of machinery.
CAUTION
When creating the operating instructions, remember that the installation instructions
are intended for qualified specialists and are not for typical users of the end product.
7.1
General information
Only components that have been approved from DewertOkin should be connected to the
ACCUCONTROL
; only approved components have been verified to work together. Ask your
customer representative for more information.
Emergency-stop switch
CAUTION
The emergency-stop switch must be accessible for all operational situations.
Inspecting before the initial commissioning and after external impacts
Heavy mechanical impacts (which may occur during transport or by dropped objects) can some-
times result in electrical malfunctions.
CAUTION
In order to improve the operational reliability, take the following steps before the initial
commissioning and after any extreme mechanical loads:
Check if the housing is damaged. If the housing shows signs of damage or if the device
heats up excessively,
•
immediately press the emergency-stop switch.
•
Unplug the ACCU from the CONTROL and take the drive system out of service.
